DeepOcean has been awarded a contract by J-Power Systems Corporation for the provision of all marine works for the Nemo Link Interconnector Project.
The Nemo Link interconnector will deliver a 1000 MW electricity link between the UK and Belgium. The link will increase energy security for both countries and support integration of renewable energy. It has been designated as one of the European Commission’s Projects of Common Interest as it will help create an integrated European energy market.
Nemo Link will consist of subsea and underground cables connected to a converter station and an electricity substation in each country, which will allow electricity to flow in either direction between the two countries. The site for the converter station and electricity substation in the UK is a site, formerly occupied by the Richborough Power Station. A similar converter station and substation is being built in the industry zone in Herdersbrug in Bruges, Belgium. Nemo Link will be the world’s first use of HVDC XLPE cables at 400 kV.
DeepOcean will execute all marine works associated with the installation and protection of the HVDC bundled cables from the transition joint bay in Kent, UK to the transition joint bay in Zeebrugge, Belgium. The project will be executed over a three year period starting in 2016 with the offshore works completing in 2018. In addition to the installation and trenching of the bundled cable system, the work scope includes route surveys and engineering, PLGR, out of service cable clearance, pre sweeping in sandwave areas and crossings construction.
The bundled HVDC cables will be installed by the Maersk Connector, DeepOcean’s new build vessel due for delivery in the first quarter of 2016. This DP2 cable installation vessel is designed to meet the challenges of the interconnector and renewables market. The vessel is capable of grounding out with its seven points mooring system which allows the cable system to be installed without the requirement for a separate shallow water cable lay vessel, thus minimizing the number of cable joints required. The bespoke 7000Te carousel system accommodates bundled installation of high specification cables with no requirement to coil the cables.
The burial of the cables will be undertaken by DeepOcean’s T3200 mechanical and jetting trenching vehicle. This trencher is the world’s most powerful subsea trencher with 3200 HP and will be configured with a single boom cutter and jetting system to protect the cable bundle according to the burial specification. The unrivalled capability of the T3200 trencher allows DeepOcean to meet the requirements for deep burial in challenging ground conditions that could not be achieved with less capable trenching systems.
Trenching and installation vessel – Maersk Connector arriving into fleet in 2016.
The T3200 – the world’s most powerful subsea trencher.